Boland CS, Sun Y and Papageorgiou DG (2024). Bandgap Engineering of 2D Materials toward High-Performing Straintronics.     vol. 24, (41) 12722-12732. 10.1021/acs.nanolett.4c03321

Dong M, Soul A, Li Y, Bilotti E, Zhang H, Cataldi P and Papageorgiou DG (2024). Transient Starch‐Based Nanocomposites for Sustainable Electronics and Multifunctional Sensing.     10.1002/adfm.202412138

Thorn TDS, Wang Y, Guo H, Lu L, Liu Y, Bilotti E, Papageorgiou DG and Zhang H (2024). Discontinuous interleaving strategies for toughening, damage sensing and repair in multifunctional carbon fibre/epoxy composites.     vol. 185, 10.1016/j.compositesa.2024.108320

Dong M, Bilotti E, Zhang H, Boland CS and Papageorgiou DG (2024). High performing piezoresistive MoS2/epoxy strain sensors for structural health monitoring.     vol. 309, 10.1016/j.polymer.2024.127449

O'Brien CT, Li Z, Liu M, Innes JR, Li S, Papageorgiou DG, Storm M, Burnett TL and Young RJ (2024). The role of cavitation in the toughening of elastomer nanocomposites reinforced with graphene nanoplatelets.     vol. 184, 10.1016/j.compositesa.2024.108269

Ekbatani S, Wang Y, Huo S, Papageorgiou D and Zhang H (2024). Nano-engineered hierarchical natural fibre composites with localised cellulose nanocrystals and tailored interphase for improved mechanical properties.     vol. 255, 10.1016/j.compscitech.2024.110719

Wang Y, Das B, Thorn TDS, Huo S, Evans J, Newton M, Liu Y, Advani SG, Papageorgiou DG, Bilotti E and Zhang H (2024). Towards highly homogeneous self-regulating heating of smart nanocomposites.     vol. 39, 10.1016/j.apmt.2024.102292

Gómez-Sánchez E, Mendoza-Duarte JM, Garay-Reyes CG, Estrada-Guel I, Papageorgiou D and Martínez-Sánchez R (2024). Fabrication of a PLA Matrix Composite Reinforced with Exfoliated Graphite Produced by a Green Route.     vol. 30, (Supplement_1) 10.1093/mam/ozae044.634

Dong M, Sun Y, Dunstan DJ, Young RJ and Papageorgiou DG (2024). Mechanical reinforcement from two-dimensional nanofillers: model, bulk and hybrid polymer nanocomposites.

Dong M, Mastroianni G, Bilotti E, Zhang H and Papageorgiou DG (2024). Biodegradable Starch-Based Nanocomposite Films with Exceptional Water and Oxygen Barrier Properties.     vol. 12, (29) 11056-11066. 10.1021/acssuschemeng.4c04198

Das B, Yu X, Wang Y, Porwal H, Evans J, Newton M, Papageorgiou D, Zhang H and Bilotti E (2024). High temperature co-polyester thermoplastic elastomer nanocomposites for flexible self-regulating heating devices.     vol. 242, 10.1016/j.matdes.2024.113000

Hu Y, Chen J, Yang G, Li Y, Dong M, Li Q, Yuan H, Zhang H, Pugno NM, Jiang J and Papageorgiou DG (2024). In-situ hybridization of an epoxy resin using polyurethane and MXene nanoplatelets for thermally stable nanocomposites with improved strength and toughness.     vol. 302, 10.1016/j.polymer.2024.127065

Aljarid AKA, Winder J, Wei C, Venkatraman A, Tomes O, Soul A, Papageorgiou DG, Möbius ME and Boland CS (2024). Hometronics – accessible production of graphene suspensions for health sensing applications using only household items.     vol. 8, (1) 28-28. 10.1038/s41699-024-00467-8

Dong M, Bilotti E, Zhang H and Papageorgiou DG (2024). Multifunctional Ti3C2Tx MXene-reinforced thermoplastic starch nanocomposites for sustainable packaging solutions.     vol. 265, (Pt 2) 10.1016/j.ijbiomac.2024.130520

Hu Y, Yang G, Chen J, Li Y, Dong M, Zhang H, Bilotti E, Jiang J and Papageorgiou DG (2024). Interfacial engineering of hybrid MXene-Ni-CF tri-core–shell composites for electromagnetic interference shielding and E-heating applications.     vol. 178, 10.1016/j.compositesa.2023.107990

Hu Y, Chen J, Yang G, Li Y, Dong M, Zhang H, Bilotti E, Jiang J and Papageorgiou DG (2024). Highly conductive and mechanically robust MXene@CF core-shell composites for in-situ damage sensing and electromagnetic interference shielding.     vol. 246, 10.1016/j.compscitech.2023.110356

Dong M, Tomes O, Soul A, Hu Y, Bilotti E, Zhang H and Papageorgiou DG (2024). Hybrid Ti3C2T x MXene and Carbon Nanotube Reinforced Epoxy Nanocomposites for Self-Sensing and Structural Health Monitoring.     vol. 7, (3) 3314-3325. 10.1021/acsanm.3c05728

Tomes O, Soul A, Zhang H, Bilotti E and Papageorgiou DG (2024). A novel electrical depercolation model for stretchable nanocomposite strain sensors.     vol. 16, (12) 6163-6175. 10.1039/d3nr05234f

Dong M, Hu Y, Yu X, Liu M, Bilotti E, Zhang H and Papageorgiou DG (2024). Probing Interfacial Interactions in Ternary Nanocomposites of Ti3C2T x MXene Nanoplatelets, Multiwalled Carbon Nanotubes, and Poly(vinyl alcohol) toward Synergistic Reinforcement.     vol. 6, (1) 207-217. 10.1021/acsapm.3c01816

Dong M, Hu Y, Zhang H, Bilotti E, Pugno N, Dunstan D and Papageorgiou DG (2023). Micromechanics of Ti3C2Tx MXene reinforced poly(vinyl alcohol) nanocomposites.     vol. 13, 10.1016/j.jcomc.2023.100427

Wei C, Roy A, Aljarid AKA, Hu Y, Roe SM, Papageorgiou DG, Arenal R and Boland CS (2023). Quasi–1D Anhydrite Nanobelts from the Sustainable Liquid Exfoliation of Terrestrial Gypsum for Future Martian‐Based Electronics.     vol. 34, (13) 10.1002/adfm.202310600

Hu Y, Chen J, Yang G, Li Y, Dong M, Li Q, Yuan H, Zhang H, Bilotti E, Jiang J and Papageorgiou D (2023). In-Situ Hybridization of an Epoxy Resin Using Polyurethane and Mxene Nanoplatelets for Improved Strength and Toughness. 10.2139/ssrn.4672498

Yao X, Wang Y, Thorn TDS, Huo S, Papageorgiou DG, Liu Y, Bilotti E and Zhang H (2023). Tailored Out-of-Oven Energy Efficient Manufacturing of High-Performance Composites with Two-Stage Self-Regulating Heating via a Double Positive Temperature Coefficient Effect.     vol. 15, (48) 56265-56274. 10.1021/acsami.3c12901

Yu X, Steiner P, Zhou Q, Kocabas C, Zhang H, Papageorgiou DG, Fenwick O, Yan H, Reece MJ and Bilotti E (2023). Simultaneous Increase in Dielectric Breakdown Strength and Thermal Conductivity of Oriented UHMWPE Containing Diamond Nanoparticles.     10.1021/acs.macromol.3c01003

Wang Y, Yao X, Thorn TDS, Huo S, Porwal H, Newton M, Liu Y, Papageorgiou D, Bilotti E and Zhang H (2023). Energy efficient out-of-oven manufacturing of natural fibre composites with integrated sensing capabilities and improved water barrier properties.     vol. 239, 10.1016/j.compscitech.2023.110062

Aljarid AKA, Dong M, Hu Y, Wei C, Salvage JP, Papageorgiou DG and Boland CS (2023). Smart Skins Based on Assembled Piezoresistive Networks of Sustainable Graphene Microcapsules for High Precision Health Diagnostics.     vol. 33, (41) 10.1002/adfm.202303837

Dong M, Young RJ, Dunstan DJ and Papageorgiou DG (2023). Interfacial stress transfer in monolayer and few-layer MoS2 nanosheets in model nanocomposites.     vol. 233, 10.1016/j.compscitech.2022.109892

Thorn TDS, Liu Y, Yao X, Papageorgiou DG, Robinson P, Bilotti E, Peijs T and Zhang H (2023). Smart and repeatable easy-repairing and self-sensing composites with enhanced mechanical performance for extended components life.     vol. 165, 10.1016/j.compositesa.2022.107337

Zeng C, Stenier P, Chen K, Wan K, Dong M, Li S, Kocabas C, Reece MJ, Papageorgiou DG, Volkov AN, Zhang H and Bilotti E (2023). Optimization of thermoelectric properties of carbon nanotube veils by defect engineering.     vol. 10, (9) 3601-3609. 10.1039/d3mh00525a

Kernin A, Ventura L, Soul A, Chen K, Wan K, Lu W, Steiner P, Kocabas C, Papageorgiou D, Goutianos S, Zhang H and Bilotti E (2022). Kirigami inspired shape programmable and reconfigurable multifunctional nanocomposites for 3D structures.     vol. 224, 10.1016/j.matdes.2022.111335

Yu X, Bhatti MR, Ren X, Steiner P, Di Sacco F, Dong M, Zhang H, Papageorgiou D, Portale G, Kocabas C, Bastiaansen CWM, Reece M, Yan H and Bilotti E (2022). Dielectric polymer composites with ultra-high thermal conductivity and low dielectric loss.     vol. 229, 10.1016/j.compscitech.2022.109695

Papageorgiou GZ, Poulopoulou N, Nikolaidis GN, Ioannidis RO, Efstathiadou VL, Terzopoulou Z, Papageorgiou DG and Kapnisti M (2022). Aromatic But Sustainable: Poly(butylene 2, 5-furandicarboxylate) as a Crystallizing Thermoplastic in the Bioeconomy.     vol. 61, (36) 13461-13473. 10.1021/acs.iecr.2c02069

Zhao X, Mao B, Liu M, Cao J, Haigh SJ, Papageorgiou DG, Li Z and Young RJ (2022). Controlling and Monitoring Crack Propagation in Monolayer Graphene Single Crystals.     vol. 32, (42) 10.1002/adfm.202202373

Papageorgiou GZ, Nikolaidis GN, Ioannidis RO, Rinis K, Papageorgiou DG, Klonos PA, Achilias DS, Kapnisti M, Terzopoulou Z and Bikiaris DN (2022). A Step Forward in Thermoplastic Polyesters: Understanding the Crystallization and Melting of Biobased Poly(ethylene 2,5-furandicarboxylate) (PEF).     vol. 10, (21) 7050-7064. 10.1021/acssuschemeng.2c00995

Dong M, Sun Y, Dunstan DJ and Papageorgiou DG (2022). Utilising buckling modes for the determination of the anisotropic mechanical properties of As2S3 nanosheets.     vol. 14, (21) 7872-7880. 10.1039/d2nr00867j

Hu Y, Pang S, Li J, Jiang J and Papageorgiou DG (2022). Enhanced interfacial properties of hierarchical MXene/CF composites via low content electrophoretic deposition.     vol. 237, 10.1016/j.compositesb.2022.109871

Bhatti MRA, Kernin A, Tausif M, Zhang H, Papageorgiou D, Bilotti E, Peijs T and Bastiaansen CWM (2022). Light-Driven Actuation in Synthetic Polymers: A Review from Fundamental Concepts to Applications.     vol. 10, (10) 10.1002/adom.202102186

Innes JR, Young RJ and Papageorgiou DG (2022). Graphene Nanoplatelets as a Replacement for Carbon Black in Rubber Compounds.     vol. 14, (6) 10.3390/polym14061204

Cataldi P, Lamanna L, Bertei C, Arena F, Rossi P, Liu M, Di Fonzo F, Papageorgiou DG, Luzio A and Caironi M (2022). An Electrically Conductive Oleogel Paste for Edible Electronics.     10.1002/adfm.202113417

Sun YW, Gehringer D, Holec D, Papageorgiou DG, Fenwick O, Qureshi SM, Humphreys CJ and Dunstan DJ (2022). Significant interlayer coupling in bilayer graphene and double-walled carbon nanotubes: A refinement of obtaining strain in low-dimensional materials.     vol. 105, (2) 10.1103/physrevb.105.024103

Wan K, Liu Z, Schroeder BC, Chen G, Santagiuliana G, Papageorgiou DG, Zhang H and Bilotti E (2021). Highly stretchable and sensitive self-powered sensors based on the N-Type thermoelectric effect of polyurethane/Nax(Ni-ett)n/graphene oxide composites.     vol. 28, 10.1016/j.coco.2021.100952

Carrola M, Asadi A, Zhang H, Papageorgiou DG, Bilotti E and Koerner H (2021). Best of Both Worlds: Synergistically Derived Material Properties via Additive Manufacturing of Nanocomposites (Adv. Funct. Mater. 46/2021).   vol. 31, (46) 2170343-2170343. 10.1002/adfm.202170343

Dong M, Zhang H, Tzounis L, Santagiuliana G, Bilotti E and Papageorgiou DG (2021). Multifunctional epoxy nanocomposites reinforced by two-dimensional materials: A review.     vol. 185, 57-81. 10.1016/j.carbon.2021.09.009

Carrola M, Asadi A, Zhang H, Papageorgiou DG, Bilotti E and Koerner H (2021). Best of Both Worlds: Synergistically Derived Material Properties via Additive Manufacturing of Nanocomposites.     vol. 31, (46) 10.1002/adfm.202103334

Wan K, Liu Y, Santagiuliana G, Barandun G, Taroni Junior P, Güder F, Bastiaansen CWM, Baxendale M, Fenwick O, Papageorgiou DG, Krause S, Zhang H and Bilotti E (2021). Self-powered ultrasensitive and highly stretchable temperature–strain sensing composite yarns.   10.1039/d1mh00908g

Liu M, Hui JH, Kinloch IA, Young RJ and Papageorgiou DG (2021). Deformation and tearing of graphene-reinforced elastomer nanocomposites.     vol. 25, 10.1016/j.coco.2021.100764

Sun YW, Papageorgiou D, Puech P, Proctor JE, Machon D, Bousige C, San-Miguel A, Humphreys C and Dunstan DJ (2021). Mechanical Properties of Graphene.     10.1063/5.0040578

Papageorgiou DG, Tsetsou I, Ioannidis RO, Nikolaidis GN, Exarhopoulos S, Kasmi N, Bikiaris DN, Achilias DS and Papageorgiou GZ (2021). A new era in engineering plastics: Compatibility and perspectives of sustainable alipharomatic poly(ethylene terephthalate)/poly(ethylene 2,5-furandicarboxylate) blends.     vol. 13, (7) 10.3390/polym13071070

Vidakis N, Petousis M, Tzounis L, Maniadi A, Velidakis E, Mountakis N, Papageorgiou D, Liebscher M and Mechtcherine V (2020). Sustainable additive manufacturing: Mechanical response of polypropylene over multiple recycling processes.     vol. 13, (1) 1-16. 10.3390/su13010159

Petousis M, Tzounis L, Papageorgiou D and Vidakis N (2020). Decoration of SiO2 and Fe3O4 Nanoparticles onto the Surface of MWCNT-Grafted Glass Fibers: A Simple Approach for the Creation of Binary Nanoparticle Hierarchical and Multifunctional Composite Interphases.     vol. 10, (12) 10.3390/nano10122500

Liu M, Cataldi P, Young RJ, Papageorgiou DG and Kinloch IA (2020). High-performance fluoroelastomer-graphene nanocomposites for advanced sealing applications.     vol. 202, 108592-108592. 10.1016/j.compscitech.2020.108592

Poulopoulou N, Guigo N, Sbirrazzuoli N, Papageorgiou DG, Bikiaris DN, Nikolaidis GN and Papageorgiou GZ (2020). Towards increased sustainability for aromatic polyesters: Poly(butylene 2,5-furandicarboxylate) and its blends with poly(butylene terephthalate).     10.1016/j.polymer.2020.123157

Cataldi P, Papageorgiou DG, Pinter G, Kretinin AV, Sampson WW, Young RJ, Bissett M and Kinloch IA (2020). Graphene–Polyurethane Coatings for Deformable Conductors and Electromagnetic Interference Shielding.     vol. 6, (9) 10.1002/aelm.202000429

Cataldi P, Steiner P, Raine T, Lin K, Kocabas C, Young RJ, Bissett M, Kinloch IA and Papageorgiou DG (2020). Multifunctional Biocomposites Based on Polyhydroxyalkanoate and Graphene/Carbon Nanofiber Hybrids for Electrical and Thermal Applications.     10.1021/acsapm.0c00539

Terzopoulou Z, Papadopoulos L, Zamboulis A, Papageorgiou DG, Papageorgiou GZ and Bikiaris DN (2020). Tuning the properties of furandicarboxylic acid-based polyesters with copolymerization: A review.     vol. 12, (6) 10.3390/POLYM12061209

Liu M, Li S, Kinloch IA, Young RJ and Papageorgiou DG (2020). Anisotropic swelling of elastomers filled with aligned 2D materials.   vol. 7, (2) 10.1088/2053-1583/ab6f7b

Liu M, Kinloch IA, Young RJ and Papageorgiou DG (2020). Realising biaxial reinforcement: Via orientation-induced anisotropic swelling in graphene-based elastomers.   vol. 12, (5) 3377-3386. 10.1039/c9nr09988c

Papageorgiou DG, Li Z, Liu M, Kinloch IA and Young RJ (2020). Mechanisms of mechanical reinforcement by graphene and carbon nanotubes in polymer nanocomposites.     vol. 12, (4) 2228-2267. 10.1039/c9nr06952f

Liu M, Kinloch IA, Young RJ and Papageorgiou DG (2019). Modelling mechanical percolation in graphene-reinforced elastomer nanocomposites.     vol. 178, 10.1016/j.compositesb.2019.107506

Vallés C, Papageorgiou DG, Lin F, Li Z, Spencer BF, Young RJ and Kinloch IA (2019). PMMA-grafted graphene nanoplatelets to reinforce the mechanical and thermal properties of PMMA composites.     vol. 157, 750-760. 10.1016/j.carbon.2019.10.075

Li Z, Young RJ, Papageorgiou DG, Kinloch IA, Zhao X, Yang C and Hao S (2019). Interfacial stress transfer in strain engineered wrinkled and folded graphene.     vol. 6, (4) 10.1088/2053-1583/ab3167

Zhao X, Papageorgiou DG, Zhu L, Ding F and Young RJ (2019). The strength of mechanically-exfoliated monolayer graphene deformed on a rigid polymer substrate.     vol. 11, (30) 14339-14353. 10.1039/c9nr04720d

Poulopoulou N, Pipertzis A, Kasmi N, Bikiaris DN, Papageorgiou DG, Floudas G and Papageorgiou GZ (2019). Green polymeric materials: On the dynamic homogeneity and miscibility of furan-based polyester blends.     vol. 174, 187-199. 10.1016/j.polymer.2019.04.058

Terzopoulou Z, Tarani E, Kasmi N, Papadopoulos L, Chrissafis K, Papageorgiou DG, Papageorgiou GZ and Bikiaris DN (2019). Thermal Decomposition Kinetics and Mechanism of In-Situ Prepared Bio-based Poly(propylene 2,5-furan dicarboxylate)/Graphene Nanocomposites.     vol. 24, (9) 10.3390/molecules24091717

Papageorgiou DG, Liu M, Li Z, Vallés C, Young RJ and Kinloch IA (2019). Hybrid poly(ether ether ketone) composites reinforced with a combination of carbon fibres and graphene nanoplatelets.     vol. 175, 60-68. 10.1016/j.compscitech.2019.03.006

Poulopoulou N, Kasmi N, Siampani M, Terzopoulou ZN, Bikiaris DN, Achilias DS, Papageorgiou DG and Papageorgiou GZ (2019). Exploring Next-Generation Engineering Bioplastics: Poly(alkylene furanoate)/Poly(alkylene terephthalate) (PAF/PAT) Blends.     vol. 11, (3) 10.3390/polym11030556

Kasmi N, Poulopoulou N, Terzopoulou Z, Papageorgiou DG, Bikiaris DN and Papageorgiou GZ (2019). Sustainable thermoplastics from renewable resources: Thermal behavior of poly(1,4-cyclohexane dimethylene 2,5-furandicarboxylate).     vol. 112, 1-14. 10.1016/j.eurpolymj.2018.12.026

Zhao X, Papageorgiou DG, Zhu L, Ding F and Young RJ (2019). The strength of mechanically-exfoliated monolayer graphene deformed on a rigid polymer substrate.     vol. 11, (30) 14339-14353. 10.1039/c9nr04720d

Papadopoulos L, Terzopoulou Z, Bikiaris DN, Patsiaoura D, Chrissafis K, Papageorgiou DG and Papageorgiou GZ (2018). Synthesis and Characterization of In-Situ-Prepared Nanocomposites Based on Poly(Propylene 2,5-Furan Dicarboxylate) and Aluminosilicate Clays.     vol. 10, (9) 10.3390/polym10090937

Liu M, Papageorgiou DG, Li S, Lin K, Kinloch IA and Young RJ (2018). Micromechanics of reinforcement of a graphene-based thermoplastic elastomer nanocomposite.     vol. 110, 84-92. 10.1016/j.compositesa.2018.04.014

Marsden AJ, Papageorgiou DG, Vallés C, Liscio A, Palermo V, Bissett MA, Young RJ and Kinloch IA (2018). Electrical percolation in graphene–polymer composites.     vol. 5, (3) 10.1088/2053-1583/aac055

Poulopoulou N, Kasmi N, Bikiaris DN, Papageorgiou DG, Floudas G and Papageorgiou GZ (2018). Sustainable Polymers from Renewable Resources: Polymer Blends of Furan‐Based Polyesters.     vol. 303, (8) 10.1002/mame.201800153

Tarani E, Papageorgiou DG, Valles C, Wurm A, Terzopoulou Z, Bikiaris DN, Schick C, Chrissafis K and Vourlias G (2018). Insights into crystallization and melting of high density polyethylene/graphene nanocomposites studied by fast scanning calorimetry.     vol. 67, 349-358. 10.1016/j.polymertesting.2018.03.029

Silva R, Singh R, Sarker B, Papageorgiou DG, Juhasz-Bortuzzo JA, Roether JA, Cicha I, Kaschta J, Schubert DW, Chrissafis K, Detsch R and Boccaccini AR (2018). Hydrogel matrices based on elastin and alginate for tissue engineering applications.     vol. 114, 614-625. 10.1016/j.ijbiomac.2018.03.091

Papageorgiou DG, Terzopoulou Z, Fina A, Cuttica F, Papageorgiou GZ, Bikiaris DN, Chrissafis K, Young RJ and Kinloch IA (2018). Enhanced thermal and fire retardancy properties of polypropylene reinforced with a hybrid graphene/glass-fibre filler.     vol. 156, 95-102. 10.1016/j.compscitech.2017.12.019

Young RJ, Liu M, Kinloch IA, Li S, Zhao X, Vallés C and Papageorgiou DG (2018). The mechanics of reinforcement of polymers by graphene nanoplatelets.     vol. 154, 110-116. 10.1016/j.compscitech.2017.11.007

Terzopoulou Z, Papageorgiou DG, Papageorgiou GZ and Bikiaris DN (2018). Effect of surface functionalization of halloysite nanotubes on synthesis and thermal properties of poly(ε-caprolactone).     vol. 53, (9) 6519-6541. 10.1007/s10853-018-1993-1

Papageorgiou DG, Bikiaris DN and Papageorgiou GZ (2018). Synthesis and controlled crystallization of in situ prepared poly(butylene-2,6-naphthalate) nanocomposites.     vol. 20, (25) 3590-3600. 10.1039/c8ce00260f

Papageorgiou DG, Kinloch IA and Young RJ (2017). Mechanical properties of graphene and graphene-based nanocomposites.   vol. 90, 75-127. 10.1016/j.pmatsci.2017.07.004

Papageorgiou GZ and Papageorgiou DG (2017). Solid-state structure and thermal characteristics of a sustainable biobased copolymer: Poly(butylene succinate-co-furanoate).     vol. 656, 112-122. 10.1016/j.tca.2017.09.004

Terzopoulou Z, Patsiaoura D, Papageorgiou DG, Pavlidou E, Chrissafis K, Tzounis L, Papageorgiou GZ and Bikiaris DN (2017). Effect of MWCNTs and their modification on crystallization and thermal degradation of poly(butylene naphthalate).     vol. 656, 59-69. 10.1016/j.tca.2017.08.012

Quiles-Díaz S, Enrique-Jimenez P, Papageorgiou DG, Ania F, Flores A, Kinloch IA, Gómez-Fatou MA, Young RJ and Salavagione HJ (2017). Influence of the chemical functionalization of graphene on the properties of polypropylene-based nanocomposites.     vol. 100, 31-39. 10.1016/j.compositesa.2017.04.019

Konstantopoulou M, Terzopoulou Z, Nerantzaki M, Tsagkalias J, Achilias DS, Bikiaris DN, Exarhopoulos S, Papageorgiou DG and Papageorgiou GZ (2017). Poly(ethylene furanoate-co-ethylene terephthalate) biobased copolymers: Synthesis, thermal properties and cocrystallization behavior.     vol. 89, 349-366. 10.1016/j.eurpolymj.2017.02.037

Papageorgiou DG, Kinloch IA and Young RJ (2016). Hybrid multifunctional graphene/glass-fibre polypropylene composites.   vol. 137, 44-51. 10.1016/j.compscitech.2016.10.018

Papageorgiou GZ, Papageorgiou DG, Terzopoulou Z and Bikiaris DN (2016). Production of bio-based 2,5-furan dicarboxylate polyesters: Recent progress and critical aspects in their synthesis and thermal properties.     vol. 83, 202-229. 10.1016/j.eurpolymj.2016.08.004

Silva R, Singh R, Sarker B, Papageorgiou DG, Juhasz JA, Roether JA, Cicha I, Kaschta J, Schubert DW, Chrissafis K, Detsch R and Boccaccini AR (2016). Soft-matrices based on silk fibroin and alginate for tissue engineering.     vol. 93, (Pt B) 1420-1431. 10.1016/j.ijbiomac.2016.04.045

Papageorgiou DG, Guigo N, Tsanaktsis V, Exarhopoulos S, Bikiaris DN, Sbirrazzuoli N and Papageorgiou GZ (2016). Fast Crystallization and Melting Behavior of a Long-Spaced Aliphatic Furandicarboxylate Biobased Polyester, Poly(dodecylene 2,5-furanoate).     vol. 55, (18) 5315-5326. 10.1021/acs.iecr.6b00811

Terzopoulou Z, Tsanaktsis V, Bikiaris DN, Exarhopoulos S, Papageorgiou DG and Papageorgiou GZ (2016). Biobased poly(ethylene furanoate- co -ethylene succinate) copolyesters: solid state structure, melting point depression and biodegradability.     vol. 6, (87) 84003-84015. 10.1039/c6ra15994j

Papageorgiou DG, Kinloch IA and Young RJ (2015). Graphene/elastomer nanocomposites.     vol. 95, 460-484. 10.1016/j.carbon.2015.08.055

Tsanaktsis V, Papageorgiou DG, Exarhopoulos S, Bikiaris DN and Papageorgiou GZ (2015). Crystallization and Polymorphism of Poly(ethylene furanoate).     vol. 15, (11) 5505-5512. 10.1021/acs.cgd.5b01136

Papageorgiou DG, Roumeli E, Terzopoulou Z, Tsanaktsis V, Chrissafis K and Bikiaris D (2015). Polycaprolactone/multi-wall carbon nanotube nanocomposites prepared by in situ ring opening polymerization: Decomposition profiling using thermogravimetric analysis and analytical pyrolysis–gas chromatography/mass spectrometry.     vol. 115, 125-131. 10.1016/j.jaap.2015.07.007

Papageorgiou GZ, Guigo N, Tsanaktsis V, Papageorgiou DG, Exarhopoulos S, Sbirrazzuoli N and Bikiaris DN (2015). On the bio-based furanic polyesters: Synthesis and thermal behavior study of poly(octylene furanoate) using fast and temperature modulated scanning calorimetry.     vol. 68, 115-127. 10.1016/j.eurpolymj.2015.04.011

Papageorgiou DG, Chrissafis K and Bikiaris DN (2015). β-Nucleated Polypropylene: Processing, Properties and Nanocomposites.     vol. 55, (4) 596-629. 10.1080/15583724.2015.1019136

Papageorgiou GZ, Tsanaktsis V, Papageorgiou DG, Chrissafis K, Exarhopoulos S and Bikiaris DN (2015). Furan-based polyesters from renewable resources: Crystallization and thermal degradation behavior of poly(hexamethylene 2,5-furan-dicarboxylate).     vol. 67, 383-396. 10.1016/j.eurpolymj.2014.08.031

Roumeli E, Papageorgiou DG, Tsanaktsis V, Terzopoulou Z, Chrissafis K, Avgeropoulos A and Bikiaris DN (2015). Amino-Functionalized Multiwalled Carbon Nanotubes Lead to Successful Ring-Opening Polymerization of Poly(ε-caprolactone): Enhanced Interfacial Bonding and Optimized Mechanical Properties.     vol. 7, (21) 11683-11694. 10.1021/acsami.5b03693

Papageorgiou DG, Filippousi M, Pavlidou E, Chrissafis K, Van Tendeloo G and Bikiaris D (2015). Effect of clay modification on structure–property relationships and thermal degradation kinetics of β-polypropylene/clay composite materials.     vol. 122, (1) 393-406. 10.1007/s10973-015-4705-y

Papageorgiou GZ, Papageorgiou DG, Tsanaktsis V and Bikiaris DN (2015). Synthesis of the bio-based polyester poly(propylene 2,5-furan dicarboxylate). Comparison of thermal behavior and solid state structure with its terephthalate and naphthalate homologues.     vol. 62, 28-38. 10.1016/j.polymer.2015.01.080

Tsanaktsis V, Vouvoudi E, Papageorgiou GZ, Papageorgiou DG, Chrissafis K and Bikiaris DN (2015). Thermal degradation kinetics and decomposition mechanism of polyesters based on 2,5-furandicarboxylic acid and low molecular weight aliphatic diols.     vol. 112, 369-378. 10.1016/j.jaap.2014.12.016

Tsanaktsis V, Terzopoulou Z, Exarhopoulos S, Bikiaris DN, Achilias DS, Papageorgiou DG and Papageorgiou GZ (2015). Sustainable, eco-friendly polyesters synthesized from renewable resources: preparation and thermal characteristics of poly(dimethyl-propylene furanoate).     vol. 6, (48) 8284-8296. 10.1039/c5py01367d

Tsanaktsis V, Bikiaris DN, Guigo N, Exarhopoulos S, Papageorgiou DG, Sbirrazzuoli N and Papageorgiou GZ (2015). Synthesis, properties and thermal behavior of poly(decylene-2,5-furanoate): a biobased polyester from 2,5-furan dicarboxylic acid.     vol. 5, (91) 74592-74604. 10.1039/c5ra13324f

Papageorgiou DG, Zhuravlev E, Papageorgiou GZ, Bikiaris D, Chrissafis K and Schick C (2014). Kinetics of nucleation and crystallization in poly(butylene succinate) nanocomposites.     vol. 55, (26) 6725-6734. 10.1016/j.polymer.2014.11.014

Papageorgiou GZ, Tsanaktsis V, Papageorgiou DG, Exarhopoulos S, Papageorgiou M and Bikiaris DN (2014). Evaluation of polyesters from renewable resources as alternatives to the current fossil-based polymers. Phase transitions of poly(butylene 2,5-furan-dicarboxylate).     vol. 55, (16) 3846-3858. 10.1016/j.polymer.2014.06.025

Papageorgiou DG, Tzounis L, Papageorgiou GZ, Bikiaris DN and Chrissafis K (2014). β-nucleated propylene–ethylene random copolymer filled with multi-walled carbon nanotubes: Mechanical, thermal and rheological properties.     vol. 55, (16) 3758-3769. 10.1016/j.polymer.2014.06.012

Papageorgiou DG, Chrissafis K, Pavlidou E, Deliyanni EA, Papageorgiou GZ, Terzopoulou Z and Bikiaris DN (2014). Effect of nanofiller’s size and shape on the solid state microstructure and thermal properties of poly(butylene succinate) nanocomposites.     vol. 590, 181-190. 10.1016/j.tca.2014.06.030

Papageorgiou DG, Vourlias G, Bikiaris DN and Chrissafis K (2014). Effect of Silica Nanoparticles Modification on the Thermal, Structural, and Decomposition Properties of a β‐Nucleated Poly(propylene‐co‐ethylene) Matrix.     vol. 215, (9) 839-850. 10.1002/macp.201400030

Silva R, Singh R, Sarker B, Papageorgiou DG, Juhasz JA, Roether JA, Cicha I, Kaschta J, Schubert DW, Chrissafis K, Detsch R and Boccaccini AR (2014). Hybrid hydrogels based on keratin and alginate for tissue engineering.     vol. 2, (33) 5441-5451. 10.1039/c4tb00776j

Sarker B, Papageorgiou DG, Silva R, Zehnder T, Gul-E-Noor F, Bertmer M, Kaschta J, Chrissafis K, Detsch R and Boccaccini AR (2014). Fabrication of alginate–gelatin crosslinked hydrogel microcapsules and evaluation of the microstructure and physico-chemical properties.     vol. 2, (11) 1470-1482. 10.1039/c3tb21509a

Papageorgiou DG, Roumeli E, Chrissafis K, Lioutas C, Triantafyllidis K, Bikiaris D and Boccaccini AR (2014). Thermal degradation kinetics and decomposition mechanism of PBSu nanocomposites with silica-nanotubes and strontium hydroxyapatite nanorods.     vol. 16, (10) 4830-4842. 10.1039/c3cp55103b

Papageorgiou GZ, Karandrea E, Giliopoulos D, Papageorgiou DG, Ladavos A, Katerinopoulou A, Achilias DS, Triantafyllidis KS and Bikiaris DN (2014). Effect of clay structure and type of organomodifier on the thermal properties of poly(ethylene terephthalate) based nanocomposites.     vol. 576, 84-96. 10.1016/j.tca.2013.12.006

Papageorgiou GZ, Papageorgiou DG, Chrissafis K, Bikiaris D, Will J, Hoppe A, Roether JA and Boccaccini AR (2013). Crystallization and Melting Behavior of Poly(Butylene Succinate) Nanocomposites Containing Silica-Nanotubes and Strontium Hydroxyapatite Nanorods.     vol. 53, (2) 678-692. 10.1021/ie403238u

Papageorgiou DG, Vourlias G, Bikiaris DN and Chrissafis K (2013). Synergistic Effect of Functionalized Silica Nanoparticles and a β‐Nucleating Agent for the Improvement of the Mechanical Properties of a Propylene/Ethylene Random Copolymer.     vol. 299, (6) 707-721. 10.1002/mame.201300320

Papageorgiou DG, Papageorgiou GZ, Zhuravlev E, Bikiaris D, Schick C and Chrissafis K (2013). Competitive Crystallization of a Propylene/Ethylene Random Copolymer Filled with a β‑Nucleating Agent and Multi-Walled Carbon Nanotubes. Conventional and Ultrafast DSC Study.     vol. 117, (47) 14875-14884. 10.1021/jp409395h

Papageorgiou GZ, Nerantzaki M, Grigoriadou I, Papageorgiou DG, Chrissafis K and Bikiaris D (2013). Isotactic Polypropylene/Multi‐Walled Carbon Nanotube Nanocomposites: The Effect of Modification of MWCNTs on Mechanical Properties and Melt Crystallization.     vol. 214, (21) 2415-2431. 10.1002/macp.201300355

Papageorgiou DG, Papageorgiou GZ, Bikiaris DN and Chrissafis K (2013). Crystallization and melting of propylene–ethylene random copolymers. Homogeneous nucleation and β-nucleating agents.     vol. 49, (6) 1577-1590. 10.1016/j.eurpolymj.2013.02.002

Papageorgiou DG, Bikiaris DN and Chrissafis K (2012). Effect of crystalline structure of polypropylene random copolymers on mechanical properties and thermal degradation kinetics.     vol. 543, 288-294. 10.1016/j.tca.2012.06.007

Papageorgiou DG and Bakoglidis K (2012). Use of nanomaterials for the improvement of various industrial and biomedical applications. A review.   vol. 13, (2) 593-602.